Saddlebag

$80.00

Our Saddlebag is a Texas Heritage original that Jason thought about for years before creating. Traditionally, a saddlebag was extra storage that was strapped onto the side of a saddle, a bicycle, or a motorcycle. Small things that needed to be kept close at hand were stored inside. This organizer provides versatility and convenience no matter where you mount it!

  • Overall dimensions - 18” wide x 5.5” tall

  • 12 pockets

    • 9 rear pockets all 4” deep and vary in width from 1”-3” wide

      • Both outside pockets are pass through allowing for longer items such as squares or marking gauges

    • 3 front pockets all 3” deep and 2.5 “ wide - pleated to allow for bulkier items like small tape measures

  • Made with 14.7 oz. waxed canvas

  • Double stitched construction

  • Hand peened Copper rivets at all stress points

  • Mounts with four #6 Brass screws (included) that go through leather reinforced eyelets

  • Can be mounted to a wall, inside a toolchest, or even on the side of a workbench!

Fabric Color:
Quantity:
Add To Cart

Our Saddlebag is a Texas Heritage original that Jason thought about for years before creating. Traditionally, a saddlebag was extra storage that was strapped onto the side of a saddle, a bicycle, or a motorcycle. Small things that needed to be kept close at hand were stored inside. This organizer provides versatility and convenience no matter where you mount it!

  • Overall dimensions - 18” wide x 5.5” tall

  • 12 pockets

    • 9 rear pockets all 4” deep and vary in width from 1”-3” wide

      • Both outside pockets are pass through allowing for longer items such as squares or marking gauges

    • 3 front pockets all 3” deep and 2.5 “ wide - pleated to allow for bulkier items like small tape measures

  • Made with 14.7 oz. waxed canvas

  • Double stitched construction

  • Hand peened Copper rivets at all stress points

  • Mounts with four #6 Brass screws (included) that go through leather reinforced eyelets

  • Can be mounted to a wall, inside a toolchest, or even on the side of a workbench!

Our Saddlebag is a Texas Heritage original that Jason thought about for years before creating. Traditionally, a saddlebag was extra storage that was strapped onto the side of a saddle, a bicycle, or a motorcycle. Small things that needed to be kept close at hand were stored inside. This organizer provides versatility and convenience no matter where you mount it!

  • Overall dimensions - 18” wide x 5.5” tall

  • 12 pockets

    • 9 rear pockets all 4” deep and vary in width from 1”-3” wide

      • Both outside pockets are pass through allowing for longer items such as squares or marking gauges

    • 3 front pockets all 3” deep and 2.5 “ wide - pleated to allow for bulkier items like small tape measures

  • Made with 14.7 oz. waxed canvas

  • Double stitched construction

  • Hand peened Copper rivets at all stress points

  • Mounts with four #6 Brass screws (included) that go through leather reinforced eyelets

  • Can be mounted to a wall, inside a toolchest, or even on the side of a workbench!



Plane Hangers
$35.00
Holdfast Pads
$10.00
Forged Rivet Tool Set
$125.00
Sold Out
Drawknife Covers
$35.00
Pocket Book Slip Case
$25.00